Re: pinhole modelling a circuit

Date view	Thread view	Subject view	Author view

From: Steven Eiger (eiger@montana.edu)
Date: Mon Sep 11 2000 - 09:31:47 PDT

Next message: Jennifer Paillet: "Lab partner assignments"
Previous message: Mike Schulist: "modelling a circuit"
In reply to: Mike Schulist: "modelling a circuit"
Next in thread: Paul Doherty: "Re: pinhole modelling a circuit"

Message-Id: <l03102800b5e2b8f9b173@[153.90.150.107]>
Date: Mon, 11 Sep 2000 10:31:47 -0600
From: Steven Eiger <eiger@montana.edu>
Subject: Re: pinhole modelling a circuit

How about taking a hot melt glue gun and laying a few tracks of glue in the
bottm og the half pipe. This would slow the marbles.

Steven Eiger, Ph.D.

Department of Cell Biology and Neuroscience and the WWAMI Medical Education
Program
PO Box 173148
Montana State University - Bozeman
Bozeman, MT 59717-3148

Voice: (406) 994-5672
E-mail: eiger@montana.edu
FAX: (406) 994-7077

Next message: Jennifer Paillet: "Lab partner assignments"
Previous message: Mike Schulist: "modelling a circuit"
In reply to: Mike Schulist: "modelling a circuit"
Next in thread: Paul Doherty: "Re: pinhole modelling a circuit"

Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2b29 : Tue Oct 16 2001 - 12:21:54 PDT