Re: pinhole modelling a circuit

Date view	Thread view	Subject view	Author view

From: Paul Doherty (pauld@exploratorium.edu)
Date: Wed Sep 13 2000 - 13:12:51 PDT

Next message: Paul Doherty: "Re: pinhole Tahoe pressure"
Previous message: Deb Jensen: "Re: Pinhole Digest #456 - 09/12/00"
In reply to: Mike Schulist: "modelling a circuit"

Message-Id: <l0311070db5e58fd56cfe@[192.174.2.173]>
Date: Wed, 13 Sep 2000 12:12:51 -0800
From: Paul Doherty <pauld@exploratorium.edu>
Subject: Re: pinhole modelling a circuit

Hi Mike

To add the effect of a bulb or resistor you need to add friction to the
rolling marbles.
Put them into a whole tube with bumps on the side or nails through it to
slow down the marbles.

Paul D

Paul "But it is more complicated than that!" Doherty,
Senior Staff Scientist, The Exploratorium.
pauld@exploratorium.edu, www.exo.net/~pauld

Next message: Paul Doherty: "Re: pinhole Tahoe pressure"
Previous message: Deb Jensen: "Re: Pinhole Digest #456 - 09/12/00"
In reply to: Mike Schulist: "modelling a circuit"

Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2b29 : Tue Oct 16 2001 - 12:21:54 PDT