From: juggie@cix.co.uk
Date: Mon Oct 20 2003 - 23:51:52 PDT
Message-ID: <48270-22003102216515253@M2W082.mail2web.com> From: "juggie@cix.co.uk" <juggie@cix.co.uk> Subject: RE: pinhole Microwave Ovens Date: Tue, 21 Oct 2003 02:51:52 -0400
Oh dear,
I am sorry, there aren't any words that make it any easier, and it's a real
shock, even when people get to the age when you start to prepare yourself
for it - I'll catch up with you later,
take care,
N.
Original Message:
-----------------
From: SFPhysics@aol.com
Date: Mon, 20 Oct 2003 19:40:23 EDT
To: pinhole@exploratorium.edu
Subject: pinhole Microwave Ovens
>Our 6th grade science club collects and dissects donated appliances each
year. >We have just received our first microwave. Is there anything we
should
know about >before looking inside this appliance?? Should these be on our
no
thank you list???
>Thanks for the advice.
>Sherry Anderson >>
Greetings Sherry:
Microwave ovens use either a klystron vacuum tube or a magnetron vacuum
tube
to produce the microwave energy. Both types of tubes are powered by a high
voltage power supply which includes filter capacitors. While most modern
circuits include a bleed off resistor to discharge the filter capacitors
when the
unit is off there is always the odd brand that does not include this
feature.
Thus, it is always a good idea to use an insulated handle screw driver to
short
across the capacitor terminals with the metal blade as a safety precaution.
If the timer is of the electronic kind, and not electromechanical, you will
have a pc (printed circuit) board with lead/tin soldered connections. This
is
not a serious health risk but it is a good idea for the students to wash
their
hands after handling the board and before they go to use their hands to eat
something.
Try not to puncture any of the capacitors. Older microwave units contained
capacitors with PCBs (PolyChlorinatedButyls) that gave rise to fears of
environmental damage and carcinogen risks. If any of the caps are leaking
try not to
let the students come in contact with the oils.
The other main safety risk is the sharp edges on the sheet metal
construction
inside. Microwave ovens are mass produced and interior sharp points and
edges are left in the construction process. You can get a nasty cut from
some the
exposed sheet metal parts.
The microwave producing tube has a thin glass window to let out the
microwave
energy into the oven cavity. It is under a high vacuum and the window will
implode/explode if subjected to a mechanical shock. The usual safety
goggles
and slow methodical disassembly can avoid this. Primitive Pete disassembly
with a hammer is discouraged here.
Other than those few concerns your experience should be a safe one. You
will
find two motors, one to operate the microwave stirrer and the other for the
tube cooling fan, a power supply with power transformer, a timing device,
and
some really powerful magnets if the unit is of the magnetron type. Have
fun.
Al Sefl
Who thought "microwave" was some kind of hair treatment...
And that is my he has no hair left...
---------------------------------------------------------------------------
To unsubscribe from pinhole, send an email to requests@exploratorium.edu
with the words 'unsubscribe pinhole' (without the quotes) in the SUBJECT
of the email.
To subscribe to the digest and only get 1 combined message a day, send an
email to requests@exploratorium.edu with the words 'subscribe digest
pinhole' (without the quotes) in the SUBJECT of the email.
Check out what your colleagues have written on Pinhole in the Pinhole
archives at: http://saturn.exploratorium.edu/ti/alumni/pinhole.html
---------------------------------------------------------------------------
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
This archive was generated by hypermail 2.1.3 : Mon Aug 02 2004 - 12:05:32 PDT